1988 Chevrolet Silverado 2500 "distributor" Questions

...my 1994 chevy silverado To do a complete tune up: Change spark plugs and wires If equipped with a distributor Distributor cap and rotor Fuel filter Air filter Change oil and filter Check all other ...

1991 chevy silverado firing order on the distributor 7.4l engine In the diagram below #1 plug wire is the all white dot on the distributor cap at the bottom 6 Oclock position (slightly to right), the ...

...Chevy 2500 PU truck with an engine that suddenly won't start. I have changed the ignition module, distributor cap, ignition wires, ignition rotar. Distributor appears to be getting voltage, but is ...

...burning rich it is usually a problem with the automatic choke. But first spark.... If you pull the distributor cap of and turn the engine over make sure distributor is turning....There could be more ...

...seems to do it when it's at operating temp. I've replaces fuel pump, fuel filter, plug wires, and distributor rotor cap wires. The distributor itself every single sensor on top of the engine ...

...start engine and bring to normal operating temp. unplug the base timing connector located in the distributor wiring harness tan wire with a black stripe use a timing light and set timing to 0 ...

...ENGINES IS THE COMPRESSION RATIO.BORE X STROKE STILL THEM SAME. I do not know what you have for a distributor, but one little known culprit is a cracked reluctor wheel below your rotor. You can

working on a 1973 chevy silverado with 350 v8 motor in it. I'm confused with the distributor wiring to the spark plugs. Can anyone show me how to locate the spark plugs wire and wire them ...

distributor problems?? I installed an accel distributor in my truck, found it was not compatible with computer for fuel injection. So, I went back to stock. I installed it found TDC aligned timing ...