2004 Chevrolet Tracker "remove belt tensioner pulley chevy" Questions

...the direction that loosens the belt. Once tension is relieved, pull the belt off a pulley and remove the belt. You will reverse the process to install the new belt. Good luck and let me know.

...remove this Belt Let me know if this helped... Again my apologies.. ...

...remove that belt to get the fan belt on.need help GM use a particular item on one of the idlers there will be a 1/2" square hole in the center of it use a strong bar and lift the pulley up against a ...

...belt. Remove the A/C compressor drive belt from the pulleys. To install: Properly route and install the A/C compressor drive belt on the A/C compressor, the power steering (if equipped), and the ...

...Remove the belt and check all the pulleys. If any have slight roughness when turned or feel a bit loose, they can be very noisy under load. Any pulleys with glazed surfaces can also be noisy. You can ...

Belt Remove the accessory drive belt. Raise and suitably support the vehicle. Remove the engine shield bolts. Remove the engine shield. Install a ratchet into the air conditioning (A/C) belt tensioner

...remove the belt and use the tensioner to put it back.  You draw the belt and pulleys on a sheet of paper before removing, otherwise there should be a small diagram of the belt and pulley ...

...Remove the loosened belt off one of the other more easily accessed Pulleys. D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Standard Rules for ...

...is no way to determine which pulley is the tensioner. its right above the crankshaft pulley,it is smooth and you will see the ribs of the belt because the smooth side of belt is on this smooth ...

...remove the belt from the belt tensioner pulley. 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment. 4 Route ...