2004 Chevrolet Suburban "install car floor pans" Questions

Ad

install a new oil pan? Can the frame cross member be removed to allow room to swap? Is there anything that can be done to repair the leak in the existing oil pan such as epoxy or aluminum welding? YOU

Ad

floor i can only do 50mph then sercie light comes on had tranny rebuilt already. Hill size 6% grade but on flatt land rides cooll check tranny fluid level and see it its brownish black and if it seems

Ad

...install gussets and reinforced supports when they are built. The parts for these are only sold when the entire floor pan is ordered. By law corporations can not sell the parts separately infear of Do ...

Question about Chevrolet Suburban

1 Answer

...floor pan. To install: Insert the cable through the floor pan and grommet. Seat the grommet. Install the grommet retainer to the floor pan. Fasten the cable in the retaining clips. Connect the cable ...

Question about Chevrolet Suburban

3 Answers

...floor pan. Install the seal so the flange on the seal is flush with the floor pan. Place the floor mat/carpet back down on the floor. Raise and safely support the vehicle. Install the cable and ...

...Install the range selector bracket to the side of the transmission, if you had to remove it. Use the ratchet, ratchet extension and socket. 9 Lower your pickup and remove the chocks from the rear ...

...Install a new oil filter. Safely lower the vehicle to the floor and add five quarts of oil to the crankcase. Connect the negative battery cable. Start the engine and check for leaks. Good luck ...

Question about Chevrolet Suburban

2 Answers

Install any floor console components removed
for access. (Refer to 23 - BODY/INTERIOR/FLOOR
CONSOLE - INSTALLATION)
that ends install.

replace all ***** with Sccreeww
its a bad word

Question about Chevrolet Suburban

1 Answer

...floor jack to let the vehicle rfest on the jack stands. Place a large drain pan ujnder the transmission and rmove the front an side mounting bolts. Loosen, but do not remove the rear mounting bolts. ...

...magnet to fish it out. Once the four nut/washers are removed, the whole seat comes up from the floor. To install, set seat track studs back in holes and re-attach bolt/washers from underneath the

Not finding what you are looking for?
2004 Chevrolet Suburban Logo

950 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...