Question about Chevrolet Blazer
...wiper motor, under hood on fire wall, with a hammer and see if they operate, or try to move. if so you either have a bad board(removable circuit board on motor) or bad motor. if nothing happens, have ...
...wiper motor running but the wipers are not moving, there is a nut under the pivot point cap that has to be tightened. If you don't hear the motor running than you'll have to check the power to the ...
...wiper motor will work without moving the blades. cycle the wipers and allow the motor to come to the rest position. Fit the blades and tension the nut. Pull the arms off the windscreen and cycle the ...
Question about Chevrolet Blazer
...wiper linkage but wipers still dont work 1997 civic both dead? there are 2 wipers and 1 motor and simple linkage. does the motor run? does it make sound. does it turn? (look at it) if the motor runs, ...
Question about Chevrolet Blazer
...wiper motor and the long arms that go to each wiper. The end usually has a cup and ball system and the cup on wiper arms has probably popped off. Sometimes popping it back on will work for a while ...
Question about Chevrolet Blazer
...wiper stopped rotatting. the motor runs but the rod isnt moving . took the bladeo off then dimantled the cover.the motor is on the drivers side. is it disconnected, is so how to reconnect it. You ...
...wiper motor. Use a voltmeter to check for power and ground on the Pink and dark green wires. This setup has two relays: hi speed and low speed. If you're not getting power and ground with IGN switch ...
...wiper motor running but the blades do not move then the linkage grommet that connects the two wiper arms to the motor needs to be replaced. If you don't hear the motor running it could be a loose ...
...knurling at the base of the wiper blade fittings. when motor is running if there is no reciprocating movement then the gear within has failed, if moving the knurling and wiper blade base have
Question about Chevrolet Blazer
the motor. If the motor is operational but the wipers don't move chances are the linkage has become disconnected from the motor. You will have to remove the wiper cowling and inspect the wiper linkage
408 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,619 Questions
1,503 Questions