2003 Chevrolet Monte Carlo "reset light" Questions

...the hub where the sensor is took it back to the store that had the proper scanner to reset. The light still is on. Can I reset myself 2008 2012 Chevrolet Malibu Air Filter Chevrolet Air Filter 33 ...

...reset the panel so the light is off. We have added air so that is not the problem. Thanks. I have a 2001 alero and the reset button is in the fuse panel. on the drivers side of the dash Push and hold ...

...Light" has to be reset. To reset the oil change reminder light with the accelerator pedal, turn the ignition switch to the ON position. Do not start engine. After turning the ignition ON, depress the ...

oil service light, that needs to be reset with an OBII scanner, Autozone or any good parts store can reset that for you (FREE) If it's the Low oil light, then I suggest you replace oil pressure switch

...light is on, how to reset Open driver door, turn ignition on for 15 minutes. Passlock system will reset with the key on and door open. 1990 caddillac security light on just flashes how do I ...

...service vehicle light had my car serviced plugs wires oil change brakes the works how do i reset this light went to advance put it on the machine and it would not reset it u might have a blown ecm ...

light on. how do i reset it? You can take the negative battery cable off that should reset it. If your having a light come on you are having a problem somewhere,clearing the light wont fix the problem

...a recent oil change. I was able to reset the oil change light. Can I reset the security light? disconnect the +battery post with an 8mm socket and leave the thing off for 2 minutes.reconnect

...reset trac off abs light on my 03 chevy montecarlo ss. Changed the wheel bearing and sensor Had my car checked because trac off light and abs were on. Was determined left front sensor which is inside ...

...seconds. If the CHANGE OIL SOON light flashes two times, the system is reset. However, if the light comes on and stays on for five seconds, it did not reset. You'll need to reset the system ...