Question about Chevrolet Blazer
...problems with a 2002 Chevy Blazer 4.3L not turning over after changing the plugs I'm having problems with a 2002 Chevy Blazer 4.3L not turning over after changing the plugs Check the firing ...
chevy blazer that died and will not restart i have replaced the following spark plugs, cap and rotor,crank sensor, and it is geting fuel to the fuel rail, the fuel pump is kicking on to i can hear it,
Question about Chevrolet Blazer
...chevy blazer ls.it want start it try to start but dont so we put it on a scan tool and it shows 6 inc. catlyst,evap,sec air,o2 sen,o2htr,egr and then 3 ready misfire,fuel,comp Is the Battery any ...
...chevy blazer getting fuel and spark but not starting, only backfiring through carb. You need 3 things. Compression Good hot blue spark to all plugs. Good gasoline and proper fuel pressure. 63-64 lbs. ...
...chevy p/u took one wire off at a time and it will not start what is the firing order on dist. cap I know firing order on engine is 1-8-4-3-6-5-7-2 Is the coil connected to the ditributor? did you ...
Question about Chevrolet Blazer
...chevy silverado 350 5.3 the engine will crank but won't start backfiring can be from incorrect firing order--- wires crossed , ignition timing incorrect or inlet valves remaining open--- hydraulic ...
chevy camaro with a rebuilt 350 motor that is back firing and throwing fir threw the carbarator, but the person that i am working on it with says that the timing is good. have any suggestions? If your
...chevy silverado truck is backfires when i accerlate at 30 miles an hour starts to backfire i put a new ignition coil new vaccumm advance and still does the same thing. i checked the spark plugs and ...
Question about Chevrolet Blazer
chevy 400 engine hi-performance timing not running correctly the engine i have timed in order(18436572) is it any other timing specs omeonethat you know of that i can try to time this engine,this ...
chevy express van problems How to change the plug wires change one wire at a time that way you won`t get the firing order wrong. grab the plug wire at the end and twist and pull to remove. make sure ...
2,389 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,619 Questions
1,503 Questions
982 Questions