1998 Chevrolet Prizm "thrust bearing" Questions

Ad

Question about Chevrolet Prizm

1 Answer

...thrust release bearing at the same time. When fitting back make sure that the clutch plate is aligned correctly and correctly centralized as the clutch cover is tightened. Here comes the good ...

Ad

...thrust bearing. 53 plate Ford Focus 1.6 petrol zetec. The thrust bearing is normally a part of a new clutch kit.Comprises pressure plate, clutch plate and thrust bearing.You will need to remove the ...

Ad

crankshaft endplay double the max spec 01 sebring 2.7L oversized thrust bearings arent available, and the crank is a remanned crank. check for after market thrust bearings ( federal mogul ETC) . next ...

Question about Chevrolet Prizm

1 Answer

...thrust bearing dose a nissan primera gear box have to be removed to change thrust bearing on a 2ltr manual gear box all transmisions must be removed to remove thrust bearing there is no way around it ...

thrust bearing that opperates the clutch. When you buy a clutch kit you get the clutck plate, the pressure plate, and the thrust bearing in the kit so you dont need to buy them seperate. If your going

...thrust bearing inside the gear box. its a cheap part but you will have to take the gearbox off to do it. the thrust bearing pushes up against the clutch when you depress the pedal, its a bearing type ...

Question about Chevrolet Prizm

1 Answer

thrust bearings at the crank. These bearings (of sort) can be found on the second crank journal bearing (second from the back of the engine) These bearings actually limit the amount of axial (forward

...bearing thrust washer and nut.to adjust the bearing preload by tightening the nut while turning the drum or rotor,when the nut is snug try to move thrust washer with a screw driver.back the nut off ...

thrust bearing. Endplay tolerance is usually from 0.004"-0.006" for a crankshaft with a 2" to 2 3/4" main bearing diameter. If crankshaft endplay is too great, oversized thrust bearings or inserts may

...thrust bearing because of the hydraulic sustem , is the correct fork and thrust bearing? as I need to change the thrust bearing every 3 months So the hydraulic clutch is keeping pressure on the fork ...

Not finding what you are looking for?
1998 Chevrolet Prizm Logo

144 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...