1996 Chevrolet Blazer "replaced horn three times" Questions

...horn back on and if it starts it's a probable fuel pump. You can also try to turn on the key three times but do not start it those three times just see if the fuel pump sounds like it's working. On ...

...replaced. If your blazer is hard to start you can spray starting fluid in the throttle body and it is under the air horn. You remove the long screw which reveals the throttle body valve but do not ...

...replaced the starter and alternator and still doesnt turn. we tried to turn it over from a jump and still no luck. battery is from june 07. plates could be fried? also i havent changed the plugs and ...

...three compretion. To start lets be shur that as you crank the engine the security light is not flashing at you, as far as compretion goes usually it dosent just fail, what i mean is a mechanical ...

horn. Remove the steering wheel retaining nut. Use any standard steering wheel puller to remove the wheel. Then change your multifunction switch. Reassemble in reverse order. 2. This is the fast way.

...horn with three (3) prongs, I have been on line, to R&S Strauss, also a Saturn Dealer, no one is able to help me find a horn, with the 3 prongs, 3 being the focal point of my search. Can you help me? ...

...replaced and my horn will be working when I leave dealer, but then, when I need it, it does not work. I am taking back for the fourth time. Dealer stated it must be a problem with the part they ...

horn and back it out three or four turns the try it again before installing, if this makes it work better then you know the problem that the reeds are going out replace the horn for $15.00 at any auto

horn switch for an open circuit. Three: Connect a fused jumper from relay connector terminal 30 to terminal 86. If the horn does not sound, go to Four. If the horns sound, replace the horn relay. Four

...three horn blasts. Maybe your sounder is weak and needs replacing? .. No reason why not - locate the sounder and fit a horn in the place of it, though you should use a relay to provide the high ...