Question about Chevrolet Blazer
...fuel and spark.still won't start 96 blazer.4.3 ltr 4x4.new crank sensor.new fuel filter.new coil.got fuel and spark.still won't start How about the fuel pump...are you getting the fuel to ...
96 blazer wont start. The pump is fine and i just replaced the fuel filter. every thing seems to go except it will not start up and run. It turns over and has spark. i hear the pump engage what is the
...96 blazer will start and only idle once on gas it dies Could be several things but here are the known culprits: Clogged or worn Fuel Filter Clogged fuel line or injector(s) or throttle body. Worn or ...
Question about Chevrolet Blazer
96 Chevy Blazer S 10? Been having to prime in order to start and still dies. Already replace fuel pump and filter you might want to check your fuel injectors as they might be going bad. AutoZone
.... I also have all of the factory manuals for this vehicle and would be glad to give you any information you may need not olny for the fuel system but anything Good luck fellow 96 -99 blazer ...
fuel pump on a '96 blazer, it doesnt sound like the fuel pump is coming on. I switched relays around and it didnt make a difference. what else could it be besides the pump? I could be your fuel filter
Question about Chevrolet Blazer
fuel filter go for a 96 chevy blazier 4 wheel dr my blazier will shake and the speed will drop to 40 ---45 . It happened to a friends truck and he said it was the fuel filter i have one for my blazier
Question about Chevrolet Blazer
96 s10 blazer idles high and stalls after tune up and replacing spider injector Check the air filter box for fuel lying in it then pull the vacuum hose off of the map sensor and see if any fuel runs ...
...96 blazer 4wd the fuel filter should be located on the passenger side frame rail under the car. look for a canister with a line going in and coming out with screw-on type fittings. if its not on the ...
96 blazer starts but dies when put in drive Check your fuel pressure it should be 60-66 psi with key and engine off.These engines need at least 52 psi to open the popet valve inthe injectors to allow ...
2,287 questions posted
Usually answered in minutes!
2,307 Questions
1,793 Questions
1,647 Questions
1,503 Questions
982 Questions