...step 1, 25 ft-lb step 2, 45 ft-lb step 3, 65 ft-lb bolt tightening pattern front of vehicle is on left just for referance. 13 5 2 10 17 9 1 6 14 16 12 8 4 3 7 11 15 i hope that makes sense and
Question about Cars & Trucks
pattern to get the head to seal evenly. -have new head bolts. -lube bolts and finger tighten -start in the middle and work your way out one side to the next -tighten to 15 ft lbs. following sequence -
Step 5: additional 10 degrees. Each step involves starting at the center two bolts of the head and alternately tightening in a criss-cross pattern, ending with the bolts on the outer edge of the head
...pattern working your way out to the ends of head, now note that on the torque specifications some recommend that you tighten all bolts 1/3 of the torque and repeat. others are different so get a ...
...Head bolts are supposed to be only used once is 65 ftp,,,i would suggest if you get them to 60ftp i would stop,,,it should be fine,,, start in center at 35ftp working your way around,,, and back and ...
Question about Cars & Trucks
...tightening pattern 3 or 4 tightening rounds a little at a time to 95 foot pounds Hope this helps Mike About 2:10. Close is good. I have done many that is ratcheted on. I just guess. Sequence is ...
...pattern to tighten your head bolts. ...
...pattern of: (pully 8 4 1 5 9 <-- long bolts @ 63Nm (46ft/lb) side ) 7 3 2 6 10 <-- short bolts / 10 is the stud @ 58Nm (43ft/lb) give each an additional 90° (¼) turn it's best to do ...
...pattern. Install all necessary electrical and vacuum connections. Install the air cleaner assembly. Install the A/C bracket (if removed). Install the A/C compressor and belt (if removed). Connect the ...
847 questions posted
Usually answered in minutes!
420 Questions
403 Questions
331 Questions
284 Questions
284 Questions