1990 Chevrolet Corvette "idle air control valve" Questions

1994 Corvette Auto trans. - car has been in storage for 9 mos. - runs well except it wants to lurch forward while stopped at a stop (in gear). sounds like a sticky idle air control valve

Need to know where the idle air control valve is on a 1991 Corvette 350. it is located in the throttle body

...air filter. I cleaned the throttle body and the idle control motor interiors. I have had the plugs, wires and the distributor checked. I checked for vacuum leaks and found none. 17-21 lbs. of vacuum. ...

air idle control valve (which was very dirty). 4) I swapped out the ECM on my Corvette with a friend's of mine (his being identical) and that didn't correct the problem either. 5) A service technician

...idle. Check the gauge again. It needs to register approximately 46 psi. Leave the engine on and remove the vacuum hose. Check the gauge one last time. It needs to register approximately 50 psi. ...

Idle Air Control (IAC) Valve Removal Disconnect battery ground cable (14301). Refer to Section 14-01 . Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve)

...Idle air control actuator - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Idle_air_control_actuator An idle air control actuator or idle air control valve (IAC actuator/valve) ... ...

...idle air control valve located It's IAC - idle air control valve , not fuel injector idle air control valve. It's located on the throttle body -air inlet for the engine . Idle Air Control ...

...Idle Air Control Valve Testing and Cleaning https://www.youtube.com/watch?v=jgbTdyeaWbM Cleaning an Idle Air Control Valve and Throttle Body (Kia ...

...idle air control motor and solenoid, stuck throttle cable if equipped, throttle position sensor Hi, First on the throttle body the is an idle air control valve disconnect the wire, then remove the ...