2002 Pontiac Bonneville "wiper motor runs continuously" Questions

...wiper motor is somewhere in mid-cycle, the wiper motor module will continue to operate the wiper motor until the wipers reach the park position. If the ignition is turned off while the wipers are in ...

...WIPER MOTOR GROUND Disconnect connector from windshield wiper motor. Check continuity to ground at Circuit 57 (BK). Is ground OK? Yes No GO to E2 . SERVICE open in Circuit 57 (BK). RESTORE vehicle. ...

...wiper motor ground wire.make sure its tight not corroded.check wiper motor for binding or remove wiper motor hot wire to see if run with out stopping.if it run with out stopping its has a faulty ...

postion, they do run faster. Wiper Motor Switch Troubleshooting Check out someother GM wiper fail's video's ,not shuting off means the park switch is bad inside the motor assembly ,u need a new motor

...wiper motor receive inputs from the following: multifunction switch lighting control module (LCM) ignition switch battery junction box (BJB) central junction box (CJB) The following components are ...

wiper with the internal motor to see if it's not loose. If it isn't, check the fuses. If the fuses are good, using a VOM (multimeter) on the continuity setting, check to see if the wiper switch is the

...wiper motor that continues to run the wipers until they are parked. If the window where that switch does not keep the wipers running is too narrow, the momentum of the motor turning will carry the ...

...wiper motor . Damaged windshield wiper control module. Pin Number Circuit Circuit Function 1 57 (BK) Wiper Motor Ground (Park) 2 28 (BK/PK) Wiper Module to Wiper Motor (Park Switch) 3 65 (DG) Wiper ...

wiper motor has shorted out and needs replacment. In order to find out you need to disconnect the wiring from the wiper control switch,with the ignition on, if the wipers stop then you need to replace

...WIPER MOTOR The following are wiper motor system problems, tests to be performed to locate the faulty part, and the proper action to be taken. If the malfunction involves only the delay mode, switch, ...