...Raise and support vehicle. Remove flywheel cover (s). Disconnect starter solenoid wiring. Remove starter mounting bolts. Remove shims and note arrangement for reassembly (if equipped). Remove starter ...
Question about Pontiac Montana
...Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information. Remove the starter motor BAT terminal nut and electrical leads. Remove the starter motor S ...
...remove the black plastic cover from the wiper mechanism. This just slips off. No tools required for this item. This cover is located as you stand in front of vehicle with hood raised on the same side ...
...cover put jack under oil pan and raise the motor remove side engine bracket set a side remove top valve cover remove the spark plugs and turn the camshaft flywheel clockwise and bring # 1 piston at ...
...Raise the vehicle on hoist. Remove the crankshaft damper and speed indicator ring. Remove power steering pump. Remove accessory drive belt tensioner. Remove the gear cover-to-housing bolts and gently ...
Question about Cars & Trucks
...cover of my town car 93 it have no space and I'm not sure if I want to remove the a/c hose Take out motor mount bolt and raise or lower that side of the engine. what all have you remove.you ...
...Raise and support the vehicle safely. Remove the cover from the starter wiring. Remove the outer nut and wiring from the starter solenoid. Remove the screws retaining the wiring harness clips and ...
Question about Cadillac Cars & Trucks
...cover on a 2002 Cadillac Escalade to access the license plate assembly, you'll need some basic tools and follow these steps: **Note:** Be sure to take necessary safety precautions, and if you're ...
...raise the valuve cover. When replacing the gasket, make sure you get the gromets as well. Those sometimes get worn or crack since they are more exposed than the value cover gasket. Make sure that you ...
...Cover and Tube Removal Disconnect battery ground cable (14301). Remove air cleaner outlet tube (9B659). Refer to Section 03-12 . Remove two bolts retaining radiator upper sight shield (8C291) and ...
957 questions posted
Usually answered in minutes!
830 Questions
518 Questions
483 Questions
458 Questions
361 Questions