2001 Pontiac Montana "changing starter motor" Questions

...starter motor. The starter motor is serviced only as a complete unit. Disconnect the battery ground (negative) cable from the battery. Refer to Battery Negative Cable Disconnection and Connection. ...

...of and a 'clunk' could possibly be the starter itself.
The solenoid will be bolted directly to the starter motor. It's the smaller barrel shaped section on the side of the actual starter

...motor no power going to starter, have replaced starter and checked all fuses and breakers. checked at starter with test light ,power on one side but not other. nothing on key when engadged to start ...

starter was gone, replaced it with one from a 2002 Montana, however the motor won't turn over at all, wondering if I need to look at a different starter or do I need to look into something deeper?

how to change starter motor in my 1jz I need to change the starter motor as car won"t turn over. Hi Burnout, How do you know its the starter motor and not the battery or cables? Regards John

...starter motor current draw test to evaluate ur starters condition.this can b done at any shop w a charging an starting system analyzer.if ur stater is drawing more than250 amps to325a or even higher ...

...Starter motor Fig. Exploded view of the starter-XG 300 and XG 350 To install: Install or connect the following: Starter motor and torque the bolts to 25 ft. lbs. (34 Nm) Starter electrical connectors ...

...starter motor? or are they together? they are part of the starter selinoid is on it.one unit ah, that seems to be a solenoid problem. Just replace starter solenoid, i don't think there's a problem ...

starter motor Usually, you take negative battery cable loose. Then take wiring connections loose from starter motor. Remove starter motor mounting bolts then drop the starter. I need year--make--model

...starter motor shield. Remove the exhaust front and rear pipe assembly. Remove the flexplate inspection cover. Disconnect the solenoid 'S' terminal nut and battery cable nut. Unbolt the starter motor ...