...3 position (see picture below) and is a 20 amp fuse. this fuse is for the OBD connector and the cigar lighter. If this is blown your connection will not work. I hope this helps you and good
Question about Ford Expedition
...fuse to ignition to pcm power diode.if check light is working your pcm has power but you could have short in the dlc connector terminal where you scanner adapter goes.your scanner suppose power up ...
...obd-2) which connects to relay#3 in fuse compartment need code#. coil packs maybe sputters and jerks sounds like popcorn does-not have powerat times and runs smooth for short period of time(2-3min) ...
obd 2 port and cigarette lighter not working the fuse is blown. F2.41, 20 amp fuse. in the dash fuse box. F2.39 is the power port.
engine light on, no info on obd scan was tod bad fuse how do i find which fuse it is usually the auxiliary fuse ,and it under the hood
Question about Ford Expedition
ford explorer 2000, fuse location and number for data connector OBD 2 Fuse 17 in pass compartment 25amp
Question about Ford Expedition
...fuse do I pull to reset the OBD codes on a 1999 Ford Expedition 5.4L? dont pull anyfuses. Unhook the battery for about 30 minutes. IF there is a problem with it you havent addressed the computer will ...
OBD II SCANNER IT HAS NO POWER THIS IS A 2003 EXPEDITION.DO YOU THINK POSSIBLE FUSE OR LOW BATTERY PROBLEM,OR DOES SOMETHING ELSE POWER THIS the ignition key has to be in the on position not accessory
...will not self test, the fuse is in the inside fuse box behind the panel to the left of the steering wheel. FUSE #3 20A (YELLOW FUSE) Cigar Lighter, OBD-II Scan Tool Connector (12 VOLT POWER
...flicker when auto headlights have been on for a while. We think, we checked all the fuses. We ran a OBD code check and nothing showed up. Tried the Odometer Code/Problem reading using the Trip button ...
2,768 questions posted
Usually answered in minutes!
2,188 Questions
1,825 Questions
1,627 Questions
1,161 Questions
1,048 Questions