2004 Dodge Stratus "change positive" Questions

...When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the ...

...crankshaft position sensors. Since both already show a malfunction code, it would be advisable to change. Sometimes other codes show up because there is a relation but not that the item is

camshaft position sensor how hars is it to change the camshaft position sensor? its fairly easy to do, take 30 minutes the most, so definitely, you can do it yourself. just gettin to it, is the pain, ...

...I have ordered a replacement but my question is, where is this component located so that I can change it? the tps is attached to the throttle body. It operates the plate

06 DODGE STRATUS WINDOWS INOP, NO POWER TO FUSE OR CIRCUIT BREAKER ONE REAR WINDOW STARTED GIVING TROUBLE, STOPPED WORKING IN UP POSITION, SHORTLY AFTER THE OTHER THREE WINDOWS STOPPED WORKING IN UP ...

how do I change the cam position sensor on my dodge stratus 2004 Its located on top right side of oil I utubed it I only needed one small socket took ten minutes to change don't forget to disconnect ...

...dodge stratus will not always shift at the rms it should and sometimes downshifts for no reason. I changed the fluid and filter at 77,000 and that seemed to help for a while but now its donig the ...

...evening and just stopped , got it towed , on initial check engine backfired but woduldnt start . changed spark plugs, checked connections , fuses, wires , changed spark block, changed crankshaft ...

i replaced the cam sensor and the crankshaft sensor car still wont start what can i do next was driving car just quit . i checked the fuse timming belt all good changed the coil because no fire still ...

the oil change symbol continues to light up after i had an oil change if you take a look through your owners manual you may well find an instruction to turn it off. the oil change guys should do this ...