1991 Dodge Dakota "getting shift 2" Questions

...2 autotrany wont shift out of first in drive??? I put it in drive but it will only let me redline in first and will not shift out. But if I work 1, 2, on the coloum I get 1st 2nd and 3rd but will not ...

...shift to 2 have to get speed up to 35 and to 3 gear have to get it to 50 but when you get it there it stays and works fine tell you slow down and then you have to run it hard again to get it to shift ...

...2 shift high also? When you had the valve body off did you check the screens on the governor solenoid and the 3-4 shift solenoid? These tend to plug up. speed sensor located on bottom of transmission ...

...shift from 1 st to 2 nd unless i manually shift into neut. and ley the rpm. drop and then back into drive. i've replaced gov. sol., and gov. transducer, and the comp. still no help, it won't shift ...

My truck is stuck in 4 high I was told that it might have something to do with the linkage. I have no clue what that is or how to fix it. I have done most of the repairs myself. Im just not sure about

shift motor are bad for getting plugged, so you should use compressed air and see if they are clear. If everything checks out, you will have to remove the switch on the transfer case and operate it by

...2 wheel drive if it is a automatic 4x4 the vacumm line my be off or leaking somewhere If this is shift on the fly/electronic shifting, then you may have a faulty switch. First check the fuse panel to ...

...shift and no lights on the switch that changers from 2 4hi 4lo It might sound funny but sometimes you have to back up to get them out of four wheel drive mode...worth a try...Hope this helps....GOD ...

2001 Dakota Quad Cab Runs Rough My Dakota started running weird the other day. To me it feels like it's in low gear but a friend of mine thinks it's the exhaust system. It doesn't sound like exhaust ...

...shift control solenoids, or possibly even a malfunctioning Vehicle Speed Sensor. If the Check Engine light is on, have that checked first. Could be a number of things, your best bet is to scan it and ...