...that's all you get...one spark. Put the right ones back in and make sure you have the right wires on the right plugs.Also make sure you didn't disconnect any vacuum hoses while you were
...put it back together, the biggest problem i have right now is putting the back 3 sparkplugs back into the right position cause the guy didnt label it, can you help!? the spark plugs shouldnt make a ...
Question about Chevrolet Venture
...plugs put in. New plug wire put on the #1 spark plug. Does not idol good. Code still coming up. Remove the large hose that is coming from the air filter at the throttle body. There is a large ...
...plugs 3 cylinder plug was covered in carbon bad, Well you don't say what engine it has. I just had to put a helicoil in the head of a 3.4L 'cuz it had pulled the threads out of rocker arm bolt hole ...
Question about Chevrolet Venture
the number order to spark plug cables to a 1999 chevy venture look on line put the make and model and go from there.
...chevy venture,3.4 check engine light came on and idle went up That sounds like a vacuum problem due to something in your vac system went bad or got plugged or even unplugged. I would start there. ...
...chevy van will not come off so we can change the oil. We are stiping it and it isn't any looser. What should we do? Stripping it? Do you mean your rounding the head of the plug? If that is the case, ...
plugs havent been changed in 40 thousand miles... put the car on rams and go from underneath to those 3 plugs 1 - Use only OEM parts. 2 - Use spark plug boot puller. Twist and Pull. 3 - Put on the new
...plugs are located along the sides of the lower engine block They look like large 1/2" to 1" brass or silver concave disks pressed into the engine block. They protect the block from cracking by poping ...
how do I change the back three spark plugs on my 99 chevy venture you may have to put on lift or jack it up to get to plugs.
1,183 questions posted
Usually answered in minutes!
608 Questions
549 Questions
460 Questions
342 Questions
278 Questions