1999 Chevrolet Venture "fix steering linkage" Questions

fix it Help, Thanks The shifter works off a shift cable which is connected to the transmission. The connection of this cable to the transmission is on the drivers side looking straight up were you can

steering linkage bushing How can I fix/replace steering linkage go please to www.aa1car.com and get the topic and fix it. God bless you

fix it? Under your dash attatched to the steering column is your shift tube, at the end is a ball that your linkage goes too, that part has 2 T25 torx screws holding it to the shift tube, those screws

...silly thing falls apart, and you get stuck in gear! You have to remove the steering wheel and the steering column to fix this, but it is not really hard to do so. Be blessed as you find your

...fix this Check you steering and duspension system. Check ball joints and steering linkages. With the vehicle in the floor have someone move the steering wheel side to side. Not whole turns just side ...

...steering column has come detached. Depending on your model, there are pins that hold the lower transmission linkage to the column. You will have to inspect under the vehicle. If this is he problem, ...

...fix it? Not sure if this helps, but I've seen cases where the steering wheel and tilt assembly loosen up from the steering column. When this happens, the linkage that activates the ignition switch ...

...limits! Have your Mechanic check the steering tie rod bushings, and linkage. Sometimes it's just an adjustment to the steering box play(located at the end of the steering wheel shaft), - easy to

...steering, but is still in reverse . I adjusted linkage , didn't fix it. so I unhooked linkage at tranny. the tranny gear selector arm does not make the clicking sound to change the gears either,,,is ...

...mark to let key release. Do you have any ideas to fix this problem. The problem is most likely worn shifter linkage. You may be able to adjust it where the linkage is connected to the steering