1999 Chevrolet S-10 Pickup "turn security switch crank" Questions

...SECURITY LIGHT TURN ITSELF OFF.THEN TURN OFF IGNITION SWITCH FOR 5 SECONDS THEN START ENGINE.YOU CANT BYPASS THE THEFT SECURITY SYSTEM BECAUSE ITS A FEATURE THAT CAME WITH TRUCK.THEFT SECURITY SYSTEM ...

...crank it. Does this sound like a security problem? ecm more likely Yes It does. There are (or should be) toggle switches to reset security alarm. However, the ignition hot lead passes through the ...

...turn key and all lights come on (security light comes on but shuts off) but nothing. hear click from starter relay. just replaced igniton switch and didnt help. bybass start relay with a wire and ...

...security has to be learned as followed. 30 Minute Learn Procedure Turn ON the ignition, with the engine OFF. Attempt to start the engine, then release the key to ON, vehicle will not start. Observe ...

security light is hot or flashing when the key is in the on position, most likely the ignition key tumbler housing has failed. You can try resetting the pass code by turning the ignition switch to the

...security. you have to take it to a dealer or a shop with a computer and have them reset your passlock. if you have a buddy or know someone with a scan tool they may be able to do it to. i think the ...

...turn the key... If the crank impulse is reaching the starter, the light will come on, and if the light is on but no cranking it is the starter. If the crank impulse is not reaching the starter, it ...

SECURITY telltale, after approximately 10 minutes the telltale will turn OFF. Turn OFF the ignition, and wait 5 seconds. REPEAT STEPS 1 through 4 TWO MORE TIMES for a total of 3 cycles/30 minutes, the

switch. Funny thing, this truck has failed to start randomly a few times in the last few years, but try again and it works, just not now, hasn't started in 2 weeks. Doesn't crank or click ....nothing,

turn the ignition switch to the off position and then it will restart, but still run poorly and die again. If you leave the ignition switch off for 1 - 2 minutes and then restart, it will run ok for 2