1997 Chevrolet Lumina "button driver side sliding door" Questions

side up by the roof. use a hanger that is made into one piece and go into the compartment through the space made by the wood. It takes some practice, but use it to push the up button on the power lock

driver side door or dead as a door nail. When I press my key fob lock the doors will lock. Power window button on the passenger side works, the sliding door buttons and the trunk button work Check the

...side sliding door will not open anymore using the remote nor the button above the dashboard. However, the inside button next to the door does function properly. Does anyone have a suggested remedy? ...

...Driver side sliding door won't open with handle. It does it open with the auto open button on the dash. The linkage may have come off handle or lock may need lubing Door panel needs to come off to do ...

...button was pushed then the van DOES NOT lock itself.... Also if the Driver's side Sliding door is opened or ajar it does not give the warning light on the dash that it is opened or ajar like it does ...

...driver side sliding door works only if i start off manully. electronic button does not close/open the door. When door button is pushed, i can hear click and slight movement appearing to start closing ...

...button to open sounds like it unlocks but wont open. Wont work with remote either. Battery does drain. any help would be greatly appreciated Here are the codes you posted along with the possible ...

...driver side sliding door opens only 2 inches and stops with the key fob same with closing manuelly it works fine any ideas? we just had this in last month because the door liocks didnt work ...

driver side power sliding door will not open with any of the three options to open it (remote, button on side, button on console). It sounds like it wants to open but it can't. When I disable the door

...driver's side sliding door drags and if very hard to open and close manually. Works fine with the key or buttons. What is my problem? i'd suggest you just grease the channel top and bottom where the ...