1993 Chevrolet S-10 "outside door handle working" Questions

...outside door handle is bolted on the inside one may have to drill a rivet out. You can use a bolt and nut to reinstall it make sure it isnt too long. Or you can rivet it back in. You will have to ...

...door will not open either way inside or outside and all handles is there not broken with linkage hooked up on a 1993 Chevy s10 extended cab 4x4 pickup If you have the linkage there and it is working, ...

for the outside door handle. Remove the panel, peel off the plastic water shield, unclip the rod from the outside handle, and remove the two nuts on the handle. Then it can be removed from the outside

...OUTSIDE DOOR HANDLE WILL NOT OPEN DOOR. DRIVER OUTSIDE DOOR HANDLE WILL NOT OPEN DOOR. FROZE UP IN ICE STORM AND APPEARED TO BREAK WHEN TRIED TO OPEN DOOR. INSIDE HANDLE STILL WORKS. IS DIY REPAIR ...

...door outside handle quit working, opens from inside replace the outside door handle. happened to me with same car, had to replace both handles. poor design causes the lifter arm to bend and eventally ...

Outside door handle is loose and I can move it but it doesn't open the door. Inside handle moves but will not open the door. Their is a rod that runs from inside handle to a lever that pulls up on the

...outside door handle does not work After locking my keys in my car, a locksmith was able to open the door, but in doing so he somehow disconnected the linkage to the outside door handle on the driver ...

...outside door handle on the left rear door did not work, but the inside handle did. Since then the lever has worked, then not worked, intermittently. Given the rather generous extra space inside a car ...

...So it appears that it jams when the outside door handle is used to open it. And it unjams when you simultaneously use the outside door handle and physically push up on the door lock from the

...handle is new. Replaced the door outside door handle because it was broken trying to open a sticking door. must have yanked one time too many. the rod from door handle to latch is out of ...