1992 Buick Regal "connect brake lines master cylinder" Questions

Ad

...lines of dirt and air...about 8-10 times would be common for the back before a good flush/bleed is complete. When the valve is cracked open the pedal should go to the floor and should be held there ...

Ad

Question about Buick Regal

2 Answers

...brake line. There are four lines total, and they need to be put back in the same location when reinstalling the lines. You may want to mark them with masking tape and permanent marker.3Unplug the ...

Ad

...EMPTY.CHECK FOR FLUID LEAKS AT CLUTCH LINES AND CONNECTIONS AT CLUTCH RELEASE CYLINDER AND CHECK BRAKE LINES - CALIPERS - WHEEL CYLINDERS AND BRAKE BOOSTER.FIX LEAKS AND BLEED BRAKE AND CLUTCH

...brake line on the master cylinder the rear brake line is connected to the master cylinder inside the hub ..remove the tire and remove the hub the 2 bolts that hold the master cylinder in place are at ...

...connect the push rod to the brake pedal .install new clip tighten the booster unit .if you decide to remove master cylinder use inline wrenches on master cylinder to remove lines.also plug the master ...

...brake lines, or in the brake line its self. The fact that both rear wheels spin tells me that if it is a clogged line, it is between the two manifolds, (one next to the master cylinder, and the other ...

Question about Buick Regal

2 Answers

...brake lines from the rear brake to the transision block to the master cylinder you will find that the rear brakes are sepperated from the front.easy as that.the lines that go to the front are not the ...

...brake a few times until it gets hatd and hold it down ,, release line brake will get soft repeat a few times ,connect back line. thats it your done.. dont forget to rate me if you find this ...

...brake lines and i am unsure if i reconnected them back to there proper spot on the Unit i have 5 lines ... 2 from Master cylindar 1 driver front 1 passenger front and 1 rear brake line where do they ...

Question about Buick Cars & Trucks

1 Answer

...,with brake lines disconnected,then connect brake lines and bleed each brake line at master cylinder. then right rear brake,then left rear brake,then right front brake and last,left front

Not finding what you are looking for?
1992 Buick Regal Logo

446 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Buick Regal
1999 Buick Regal

757 Questions

1995 Buick Regal
1995 Buick Regal

631 Questions

1998 Buick Regal
1998 Buick Regal

489 Questions

2000 Buick Regal
2000 Buick Regal

420 Questions

2001 Buick Regal
2001 Buick Regal

426 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...