1998 GMC Sonoma "instrument cluster" Questions

Ad

instrument cluster is different than the wires that i9s present on the wiring plug that is correct for a digital instrument panel. I have the digital instrument panel with the plug that is required to

Ad

Question about GMC Sonoma

1 Answer

...instrument cluster and that there may have been a recall on my year/make/model truck. So, here's two questions: 1. Does this sound like an instrument cluster to you folks too? 2. Has there been a ...

Ad

Question about GMC Sonoma

2 Answers

...Instrument Cluster) On Convinience Center Hazzard/Turn Signal Flasher (With Digital Instrument Cluster) On Instrument Panel Fuse Block I personally call the "Convinience Center" the INCONVINIENT ...

Question about GMC Sonoma

2 Answers

...INSTRUMENT CLUSTER TO REPLACE BULBS.YOU NEED TO DISABLE AIRBAGS BEFORE WORKING AROUND DASH AND STEERING WHEEL AREA. FIRST TURN OFF RADIO THEN DISCONNECT NEGATIVE BATTERY CABLE WAIT 20 MINUTES UNTIL ...

Question about GMC Sonoma

1 Answer

...instrument cluster and changed the bulb with a known good one but still doesn't work. Is there anything else I can check. Thanks. It could well be a break in the printed circuit behind the instrument ...

...instrument cluster. Try adjusting Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. The thumbwheel for this feature is located on the center of the ...

Question about GMC Sonoma

1 Answer

my tachometer is not working You might need to replace the whole instrument cluster

96 gmc sonoma battery light on then goes off i replaced alt and battery still doing it Sounds like it could be the instrument cluster.

...instrument cluster from a 1995 auto trans work in a 1994manual trans The 1995 has a tack and the 1994 does not Depends on the connector configuration. If the connectors are the same, it should work ...

Question about GMC Sonoma

1 Answer

...instrument panel cluster, but they were fine. where do i go from here? The stepper motors go bad. Did you notice any needle vibrations before the failure. Could be a sign of corrosion. Common Chevy ...

Not finding what you are looking for?
1998 GMC Sonoma Logo

457 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Sonoma
1999 GMC Sonoma

403 Questions

1996 GMC Sonoma
1996 GMC Sonoma

359 Questions

1995 GMC Sonoma
1995 GMC Sonoma

270 Questions

1997 GMC Sonoma
1997 GMC Sonoma

249 Questions

1991 GMC Sonoma
1991 GMC Sonoma

241 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...