1997 GMC Sierra "replace intake manifold gasket 2004" Questions

...replace the intake gasgets. I am assuming that you have an external leak at the manifold area, though it could also be internal. This was an issue and in 2004 GM redesigned the intake gaskets to ...

...replace the water pump, A 2004 GMC P-up 4.3 V-8 You need to locate the water pump. It is turned by a fan belt. There should be water hoses running into and out of the pump. Water pumps have a weep ...

replace the intake manifold gasket when performing a tune up on 2004 beetle 2.0L convertible coupe run fault codes and if the are no faults from air /vacuum problems with the manifold then I would not

how do you replace gasquet on air intake of 2004 ford focus Unbolt the manifold bolts, remove intake manifold clean off old gasket with rotary wire brush or scraper ,fit new gasket and bolt back on.

...intake manifold coolant leak very common. Replace the gaskets Could be bad intake manifold gasket, could be leaky hose or thermostat gasket, could be water pump, depending upon where you see the

Intake Manifold gasket replacement fixed my very similar issue. New ones from GM are aluminum w/rubberized gasket - old ones plastic with a rubberized gasket - common failure in the 80-100k mile range

replace lower intake gasket on 2001 infinite i30 1. Detach everything connected to the upper Intake manifold 2. Remove the upper Intake Manifold 3. Remove the fuel rail and injectors 4. Remove the IM ...

...possibly hoses and belts, and most importantly, labor. I should take a decent mechanic a few hours to replace an intake manifold, so I seriously doubt you could get this done for less than

...intake manifold from my 2004 dodge intrepid 2.7 l engine to replace the water outlet from coolant system. How do I remove and replace the manifold? Will I need a new gasket? First off, you need to ...

intake manifold leak or a dry belt. check the dry belt by physically looking at the belt at look for cracks or and wobbling pulley. Try adding a lubricant to the belt to see if the noise goes away. If