1988 GMC S-15 "gm 4 speed auto trans" Questions

Ad

Question about GMC S-15

3 Answers

...4-speed overdrive use Dextron II ATF. The 117mm 4-speed uses API GL5 SAE 80W90 gear lubricant. GM recommends Synchromesh Trans Fluid (1052931) in both the 85mm 4-speed and 5-speed. Hope this

Ad

...2006 G6 GTP (4 speed auto). Although it was a GM Certified, warrantied to 100,000 miles, GM service told me that "There was nothing that they could do for me:. Cost = $ 2,000 installed for a

Ad

...4 wire plugin and my truck only had a 3 wire. It worked fine, even overdrive. A little jury rigging and ingenuity should find a way to attach your current kickdown cable to the accellerator on the ...

...4 speed automatic with 14 bolts on trans pan i do not know but give these guys a call they only sells GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com ...

Question about GMC S-15

1 Answer

...GM. Automatic Transmission, 4T40-E Initial Fill..........6.5 liters Automatic Transmission, Total Fill 4 speed 4T40-E..........12.2 liters Good luck and hope this helps, if you do use Synthetic ...

...GM box.there? not sure I will look it up. not saying I know all Limp modes on all boxes. below the shift lever is now a bank of shift solenoids but they do the same thing. if pump and its regulator ...

GM/ Daewoo car. a sad mix of parts. (sell it? i would ) the service book is here. $4 This is called an FSM. https://suzukipitstopplus.com/Products/1068-2007-forenza-reno-service-manual.aspx 783 (p07xx

...on 4 cyl. GM models most of the time the bad engine mount is the one on the passenger side of the car.And it is the TCC solenoid that gets stuck on. aaaaaaHA! is that the same solution on a 93'

Question about GMC S-15

2 Answers

...GM transmission product and they are all about the same. Good Luck Hi, Using safety precautions, you will need to remove the drive shaft from the rear end, (4 U Joint nuts). Get a small container to ...

...4-wheel drive auto, need to ride in 2nd gear for a while till trans shifts to drive, if not it's like you're in neutral. if you put it straight in drive it will pull till a certain RPM i RESTORED ONE ...

Not finding what you are looking for?
Cars & Trucks Logo

165 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...