1989 GMC Sierra "pinion seal install" Questions

...seal is going now my truck clunks when I put it in reverse could this be why No. The transfer case takes Dexron/Mercon 3. What was installed instead, for fluid? If motor oil or gear oil was used ...

...pinion. Remove oil seal from axle housing. Installation 1. Ensure oil seal surface in axle housing is clean. Coat lip of oil seal with gear lube. Install oil seal using appropriate seal installer. ...

...pinion seal. please do not forget to rate and comment about your experience with fixya. Before servicing the vehicle, please familiarize yourself with safety procedures. Remove both half shafts. Mark ...

...pinion seal out and it does mention how to get the axle loose. please do not forget to rate and comment about your experience with fixya today. Before servicing the vehicle, please familiarize ...

pinion seal. if you talking about pinion seal you need to safely raise support rear of vechicle using jack stands. you need to mark the drive shaft and companion flange for remember realignment during

pinion seal at the front of the differential. Both are easy to replace. The pinion seal will require a little more labor than the differential cover plate. You will have to remove the drive line&

...pinion shaft. CAUTION: Do not damage the inner wheel bearing oil seal. Install the two axle shafts. CAUTION: Do not damage the rubber O-rings in the U-washer grooves. Install the U-washers. Position ...

pinion seal leaking after making a 2000 mile trip pulling 11000lb.travel trailer I saw oil leaking from rear pinion seal.I can install the new seal but need toknow how tight to replace the pinion nut.

...pinion seal repaired on 1995 v-6 camaro 36000 miles ,bearing failure 1800 miles later, no water , mechanic says he never removed pinion nut or crush collar , is this possible!! thanks mike He had to ...

pinion shaft lock bolt finger-tight. CAUTION: Do not damage the wheel bearing oil seal (1177). Remove the axle shaft. ----------------------------------------------------------------------------------