1989 Mazda 626 "clutch depress" Questions

Clutch stays depressed. How do I fix this. It is Clutch stays depressed. How do I fix this. It is a Ford Meteor 2.0 GLE 1992 with hydraulic clutch system one of three things; clutch fluid low hydrolic

depress my clutch the gears will not engage and the clutch pedal will not return on its own If a hydraulic clutch, the fluid is low or has leaked, leading to air getting in the system. Thus the clutch

Clutch problem BMW 2002/318 ti..Vibration is felt through the clutch pedal whenever it is depressed during gear shifting, accompanied by a noise and burning smell mostly experienced when in heavy ...

the clutch when depressed stays to the floor can pull back up with foot. cannot change gears but can start car. the clutch cable has snapped.or the nipple on the pedal has failed,simple job to replace

car will go in gear but will not move when clutch is released,any ideas will be helpful.thanks gear shift fine when engine is running but car will not move when the clutch is released and i do hear a ...

My clutch in my 1990 mazda 626 has been giving me problems. The clutch was working perfectly fine, and then started getting stuck. As to where the clutch won't come back up after being depressed down,

...to car, it would not turnover. Dash,windows,radio,lights all work. Had her run through gears with clutch depressed to see if sensor was stuck. No change. She tried compression starting without

...engage. A lot (and I mean A LOT) of force is required to pop it into gear. -The biting point of the clutch moves to point were the pedal is nearly fully depressed to the floor. - All forementioned ...

...pump. So you will require a good trim up with calibration to set the idle and A/C idle and with the clutch depressed to be set with corrrect tuning and timing. SOUND LIKE IDLE AIR CONTROL VALVE NOT ...