how to remove the a/c clutch from a 1998 gmc sierra 1500 5.7 l I believe this AC compressor is the same as my '95 Astro. The clutch is pressed on to the compressor shaft. You should see a threaded
the clutch pedal dropped to the floor....was no smell of burnibg clutch, just lost pressure..no fluid leaking and resevior is full. replaced slave cylinder and line 3 years ago and rebuilt master ...
is it fairly easy to install a clutch master cylinder (1994 gmc sierra 2500)my main concern is disconnecting and reconnecting the push rod to the clutch pedal through the little hole in the fire wall ...
How do I remove and replace the clutch? Many things are involved in replacing a clutch. If it it 4 WD, you will have to remove the drive shafts, transfer case and the trans. If not, then just the ...
The electrical connector on the a/c unit broke off. Do I need to replace the entire a/c unit or the clutch assembly or what? THE ELECTRICAL TERMINALS ON AC CLUTCH COIL IS BROKEN OR DAMAGED THE CLUTCH ...
...more than likely a worn clutch.If you had a hydraulic issue, the truck would be hard to shift, and the pedal would let out really low.It seems like you may be looking at a clutch
hi, this could point to one of a couple of things now the first and most obvious would be that the clutch needs replacing due to it being to low as this would indeed give you the problem your having.
fan clutch Replaced clutch fan but it keeps staying on probably a bad clutch, try a different brand
...do i need a new thermostat or could it be something else? could be thermostat but also could be clutch fan,or a bad head gasket. REPLACE THERMOSTAT.CHECK CLUTCH FAN WHEN ENGINE HOT CLUTCH FAN ...
we have bled the lines on a 1994 gmc sierra and are getting no tension in the clutch what do we do? From your comments, your clutch master is no longer working. Check your clutch master, and replace ...
358 questions posted
Usually answered in minutes!
987 Questions
847 Questions
676 Questions
601 Questions
604 Questions