1995 Ford Taurus "misfire" Questions

Can't read misfire codes Misfire codes PO316 and PO300 came up during diagnostic test.....I don't know what it means.....Could someone provide some assistance? Thanks The code P0300 is a random ...

...3 years I would change the Front Oxygen Sensors, if you have 100,000 miles on them---still not the misfire issue The misfire is the ignition control module, if that is what you have, since you ...

cylinder 1 misfire code p0301 kenracer yes our codes p0301 and p0306 is the #1 and #6 misfire 98 dodge ram 1500 5.9l p0301 p0306 is this the 1 and 6 cylinder misfire?

can Misfire code says PO300 and PO316, what does it mean? P0300 is a random misfire code and P0316 is a misfire detected in the first 100 revolutions could be plugs or coil, wires? How many miles and ...

p0304 is what? P0304 is Cylinder 4 Misfire Detected. Basically, your number 4 cylinder is misfiring. Maybe a bad spark plug, or bad fuel injector. These causes are only guesses because many thing can ...

misfire, prodominent when cold start. replaced misfire, prodominent when cold start. replaced plugs, oxygen sensor,fuel injector hose and trans cool hose. Still same problem you will need to replace ...

I have a 02 ford taurus with a 3.0l 12 valve it had a misfire in three cylinders so i replaced the plugs it ran good for awhile then it started misfiring again and it had a code with multi misfire ...

misfire in number 3 and number 4 cylinders I replaced the coil pack and still have misfires in cylinders 3 and 4 Misfire is not always from coil. It could be from spark pug wire and injector. Solution

misfire codes are po0300 and po0316 Ford taurus 143000 miles on it The car misfires. Finally the engine light came on and the 2 codes are PO0300 and PO0316. Wire and Plugs have been changed but still ...

p1309 misfire code MISFIRE MONITOR AICE CHIP FAULT, MISFIRE MONITOR DISABLED Could be that the camshaft position sensor could be defective, or the camshaft synchronizer (the part that took the place ...