1992 Ford Crown Victoria "lower intake ft lb torque" Questions

...Lower vehicle. Tighten the EGR valve line nut at the EGR valve, and torque to 26-33 ft lb (35-45 Nm). Install the EGR tube and EGR valve vacuum hoses. START the engine and check for exhaust leaks. ...

intake, lower, upper and insulator bolts Upper intake Stage 1: Tighten to 20 Nm (14 lb-ft). Stage 2: Tighten to 25 Nm (18 lb-ft). Lower intake Stage 1: Tighten to 15 Nm (11 lb-ft). Stage 2: Tighten to

lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in). Tighten the vertical lower intake manifold

...Intake Lower Bolts = 10 lb.ft. Exhaust Manifold Nut = 12 lb.ft Exhaust Manifold pipe = 22 lb.ft. Exhaust Manifold Heat Shield = 18 lb.in. Rocker Arm Torque Nuts = 18 lb.ft. Hope this helped you ?? if ...

lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to 7 Nm (62 lb in). Tighten the vertical lower intake manifold

...lower intake manifold bolts (the four middle ones) to 7 Nm (62 lb in). Tighten the diagonal lower intake manifold bolts (two on each end) to7 Nm (62 lb in). Tighten the vertical lower intake manifold ...

2004 pontiac grand am 3.4 intake manifold torque speck lower manifold center bolts 115 lb in, corner bolts 18 lb ft upper intake bolts/stud 18 lb ft

...Intake Manifold Support Bracket Lower Bolt-to- Engine Block 40 N.m 30 lb ft Intake Manifold Support Bracket Upper Bolts 25 N.m 18 lb ft Lower Timing Belt Cover Bolts 10 N.m 89 lb in Oil Pan Retaining ...

...lower intake manifold bolts. Install the lower intake manifold bolts. Notice: Proper lower intake manifold fastener tightening sequence and torque is critical. Always follow the tightening sequence, ...

...Lower Intake Manifold Bolt/Stud20-3015-22-Engine Front Cover to Cylinder Block Bolt (No. 1-10)2518-Engine Front Cover to Cylinder Block Bolt (No. 11-15)10-88Water Pump Pulley to Hub (4 ...