...replace my parking brake switch for a Ford Fusion 2010 Sport model. I have found this brake switch but am unsure if it is the correct one. Anyone have any ideas as to where I can find the exact part ...
...brake pedal arm, and that wears out with age or use. It's usually easy to replace. Note for 2010 Kia Forte owners. There is a recall for a potentially faulty brake light switch. If you have ...
...switch A --circuit high===causes---wiring short to positive ---cruise / brake switch---ECM replace the brake switch first as it gets the most work , then the cruise control switch also on the ...
replace any faulty wiring as necessary. 3. Test the brake light switch: Even though you have replaced the brake switch, it is still possible that the new switch is defective. Use a multimeter to check
...brake light switch could be bad try replacing it Hyundai had a major recal on their vehicles due to a faulty brake light switch. contact your closest Hyundai dealership with the model and vin number ...
...in park If your parking on an incline, that would possibly cause it plus switch at brake pedal may need to be adjusted. If you find pushing harder on brake pedal helps, have it adjusted, or
...automatically when I am in gear or even when the car is turned on. Am I wrong? How do I get this fixed? Is it a fuse or some other switch? sounds like the brake light switch that is on the brake ...
brake switch. When signal light is activated or stepping on the brake pedal or using the emergency blinkers the noise stops. The Relay flasher was replaced but still same problem. Can You help? Ground
...the brake pedal is depressed, if not check the wiring to it for breaks, if the wiring has continuity to the switch then replace the switch. Also what is an i10, need make, model and year
1,595 questions posted
Usually answered in minutes!
870 Questions
712 Questions
723 Questions
618 Questions
593 Questions
