2003 Mazda Tribute "remove tension timing belt" Questions

Remove the drive belt using the following procedure: The serpentine accessory drive belt on this engine follows a complicated path and, if equipped with A/C could involve as many as seven pulleys. The

...belt tensioner. 3. Remove the thermostat and thermostat housing assembly. ^ Loosen ... 1 answer · Top answer: Good Afternoon, my name is ***** ***** ill be helping you, so sorry to hear about the ...

...Remove the timing belt ?B? (balancer belt) from its mounting. Timing belt tensioner adjuster rod set hole ?A? and cylinder set hole ?B??2004?2005 Galant and 2004?2005 Lancer 2.4L engine To install: ...

tension on the timing belt. NOTE: Mark the direction of timing belt rotation on the belt if it is being reused. Remove timing belt. To Install: Timing belt pulley timing marks NOTE: Timing belt pulley

...Remove water pump and replace with new one. Suggest to replace cambelt as well. Installation Ensure timing marks aligned3 & 4. Fit timing belt in anti-clockwise direction, standing at crankshaft ...

...tension, then install the timing belt cover. Install the drive belt, water pump pulley and then adjust the auto tensioner. Refill the coolant. Run the engine and check for leaks. Before servicing the ...

Remove the tensioner plunger pin, the tension is correct when the plunger pin can be removed and replaced easily. Rotate the crankshaft two revolutions clockwise and recheck the timing marks. Check to

...Remove the timing belt. To install: Install the timing belt tensioner pulley, move the tensioner to its furthest point and tighten the lockbolt. Install the timing belt onto the pulleys, as follows, ...

...Remove the timing cover(s) Align the timing marks Loosen the tensioner Remove the tensioner Remove the timing belt Check the gearwheels, tensioner and idler pulley(s) for damage and wear Renew if ...

remove the tension on the timing belt, then tighten the adjuster nut. Remove the timing belt. Do not crimp or bend the belt; protect it from contact with oil or coolant. Slide the belt off the pulleys