2003 Mazda Tribute "draw sketch" Questions

...an underhood label showing the proper belt path. It is good practice to take the time to sketch a drawing of the belt?s path BEFORE removing it. This will save much time and effort at reassembly. ...

...at the completed side and draw a rough sketch in your mind. Then go to the other side of the car and remove the parts, for your reference use the mirror image of the completed side. I hope this

...but not sure hoe to take cable out just work your way along cable and remove parts as you go remembering how they go back take notes,draw sketch's etc you'll be ok,all so get a workshop ...

...wondering if someone can help me with torque specs for valve body, also if you have a sketch or a drawing on how to remove the bolts (valve body only) Thank you in advance Marcelo Here's a link to ...

how to drain radiator show position of drain plug with the aid of sketch/drawing trouble is theres so many possible. feel at the lower tank, could face the engine, away to the left or right, could be ...

...also, you might check to see if any auto wreckers nearby have your model of VW in their yard. perhaps you can locate a radiator repair shop that might be able to draw you a sketch of your hoses

...The diagram should be on a sticker somwhere under the hood, on the side fender area, or near the front of the truck. Or before you remove the belt draw a sketch to remember the routing of the

...serpentine belt. Check under the hood for a routing diagram for re-installation. Or draw a quick sketch. Hope this helped. I wasn't more precise, as I don't know which engine/options you have in

...you haul heavy load or in cold climate then bump it up to 60/40 mix DO NOT FORGET to find or draw the belt routing diagram before you undo the tension. A 30 second sketch will save you a lot of

...you do a little sketch of how the belt is installed so you can put it back the same way...most cars have a sticker under the hood,but some dont so best to draw a quick diagram for installing ...