2004 mazda 6 enguine noise IS IT A TURBO WHISTLE TIPE NOISE? IF SO CHECK THE TEETH ON THE OIL PUMP AND THE CRANKSHAFT. IF DAMAGED REPLACE PUMP AND CRANKSHAFT.
...6 lf 2 liter petro you need spcial tool 1 bolt pin and 1 metal line you need turn the cam shafts and from the back off the cam shaft you will see some line hol thing and when strait u should posh the ...
...6 hours later and the car started - any thoughts? DOES IT DO THIS ALLWAYS WHEN HOT ? IF IT DO THEN CHECK THE IGNITIONSSYSTEM FIRST , SOME SENSOR TYP CRANKSHAFT-CAMSHAFT SENSOR GET SHORTET WHEN HOT ...
...6, and now the engine don't spark, I got code P0335 which mean crankshaft ciruit malfunction. How I fix this problem? Hi, you can fix it by reading the article found here on P0335 - ...
crankshaft to the engine block, the connecting rod caps hold the pistons to the crank and they have 16 nuts,For a 2004 mazda 6 with the 3.0 engine the torque specs are as follows. Connecting rod bolts
rear engine oil leak I see that my car has oil deposit at the rear right end of the engine. I am new to engines so cant really describe the location but its on the rear RHS of the engine, Theres some ...
does the harmonic balancer need to be in time with the timing chain Yes the harmonic pulley has to be in the correct position. usually the pointer should be at the correct timing mark with the #1 ...
tcs light flashes and p0340 code this all started at the same time i was driving at a slow speed check engine light was on the tcs off and car with curvy lines lights flash car lost power and shut off
...crankshaft alignment tool pt#303-507 for a 2004 mazda 6 2.3l engine and have not yet been able to locate one. Any ideas on where one can be found and shipped in? Here are sites that have it. The one ...
705 questions posted
Usually answered in minutes!
738 Questions
386 Questions
293 Questions
74 Questions
48 Questions