1990 Mazda 323 "head gasket" Questions

...head gasket or cracked the cylinder head itself. You will need to remove the cylinder head and at a minimum replace the head gasket. Inspect head surface after dis-assembly to verfiy that no cracking ...

...head gasket in a mazda astina 323 v6 1995 automatic oil looks like mud when we did a oil change have been told its my head gaskets We use this site the same as youYou ask ,we answerHave to ask a ...

it overheats to quickly but how much should it cost to get both head gaskets cleaned, pressure tested, planed, timing belt changed and a radiator flush on a 2litre v6 1994 mazda astina 323 how much ...

Head removed... gasket ok. No apparent cracks in head. Main fan/clutch seems to work ok. Any ideas ? Mike in NZ 1992 320i Rapid overheating. New thermostat didn't fix it. Head removed... gasket ok. No

...have a blown head gasket and coolant is getting into one of the cylinders. White smoke usually indicates a head gasket or antifreeze problem. Does exhaust smell sweet? Burned antifreeze smells

viv1992 mazda 323 1.8 efi posable blown head gasket. any problems to look for removing head ? check your valves, piston heads, rings!! get the haynes manual for proper measurements

...builds up in the system and steams.. Sorry to say, but this sure sounds like a blown head gasket . <0;<(= It's a head gasket. Trade it in as these engines do not handle overheat really

...to block seal or head gasket? probably gaskets are not sealed properly you have to redo it or try and cleaned it remove all the oil that sorrounds the engine and try to seal with a high temp ...

mazda bh famillia water leaking at back of engine near oil filter, do you know what this could be? You need to locate the leak. It could be a simple hose or as bad as a cracked head/head gasket.

...head gasket. To confirm this have a shop with a engine gas analyzer problem the coolant tank and see if any combustion gases (hydrocarbons) are present, if it indicates there are you have a leaking ...