2006 GMC Canyon "fuses relays control hvac blowers" Questions

Ad

Question about GMC Canyon

2 Answers

...HVAC control module.if fuse and relay okay remove blower motor and hotwire it if blower motor works problem could be in the HVAC control switch.if blower motor dont work when hot wire more likely ...

Ad

Question about GMC Canyon

1 Answer

04 gmc canyon replace blower motor wire harness it was fried and the resistor was fried and nothing works now after every thing was installed any solutions to what I do next ??? Please help I'm in ...

Ad

fuses and no way to find one for heater, need fuse map or fuse #'s for heater Heater not working ??? blower motor not moving any air in the system ! Blower motor relay located in the under hood fuse /

Question about GMC Canyon

1 Answer

...fuses/relays that I need to consider? The fuse you replaced powers the hvac control. The run relay is powered by a 30amp fuse in the fuse box near the battery. Is the relay getting power from that ...

Question about GMC Canyon

1 Answer

...control HVAC you have a 30amp and a 40amp fuse for the blower, and an HVAC control module.   I think the module is behind the HVAC controls in the dash.If you have automatic temp controls, ...

control relay. go online for parts and location HVAC relay # 30 located in the BCM/ fuse /relay panel .Fuse #4 30 amp located in the under hood fuse box powers the blower motor through the HVAC relay

...FOR POWER TO BLOWER MOTOR.YES BLOWER MOTOR DEFECTIVE.IF NO POWER GOING TO BLOWER MOTOR AND ALL FUSES AND RELAY GOOD.YOUR HVAC CONTROL SWITCH IS BAD OR YOU HAVE BROKE OR LOOSE WIRE AT CONTROL

...CONTROL MODULE (at the center dash) by the HVAC BLOWER RELAY powered by the BCM/HVAC FUSE (10A) which are both located in the instrument panel fuse block. I'd recommend starting by checking the 40A ...

...HVAC control module provides a voltage signal to the blower motor control processor over the blower motor speed control circuit. As the requested blower speed increases, the HVAC control module ...

...CONTROL SWITCH VERY EXPENSIVE.IT COULD COST $300.00 TO $400.00 DOLLARS.WHAT I WOULD DO IS REMOVE BLOWER MOTOR IN THE LEFT REAR TRIM PANEL.HOT WIRE TO BATTERY USING JUMPER WIRES.IF BLOWER MOTOR RUNS ...

Not finding what you are looking for?
2006 GMC Canyon Logo

248 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...