2004 GMC Envoy "release rod" Questions

Ad

Question about GMC Envoy

1 Answer

...the trunk opened if the lock actuator broke you will need to remove the door panel to get to the release rods you might reach it after opening the window and pulling the panel back enough to get ...

Ad

...release the tire from its mount. The hardest part is locking the crank rod into the spare tire mechanism through the hole in the bumper. I am sure with the 2004 Envoy the spare tire is located under ...

Ad

...release rod may have come off due to a broken retaining clip ? If its the push button type you will need a tech 2 scan tool to look at the information on the back door release switch to verify that ...

Question about GMC Envoy

2 Answers

...rod, sprayed with WD 40 (sloppy - hit or miss) - and moved the switch around. Now works fine. If I could find a way to remove the switch, I would replace. I may find the wires for the power and ...

Question about GMC Envoy

3 Answers

...rod and you can drive back the "hook". Be ready, the tire will drop immediately. I took a reciprocating saw and metal blade and cut off the hook feature. Now it is holding up my spare just fine ...

...rod ajustment The door latch doesn't release when the handle is pulled fully? Firstly, ensure both ends of the rod are attached, which I assume you've done since you're asking about adjustment. To ...

Question about GMC Envoy

1 Answer

...rod with pliers and pull to release the hood (bonnet). Go to you local dealer and you can order a new handle or go to a wrecking yard and find your car model and just remove and purchase the used ...

on the release rod. Push down on the rod and it will release...As for the power release not working put oil on the entire latch, and check your release cable inside the tail gate it might be stretched

...release tie rod end from knuckle. if you dot have splitter a good hard hit with small sledge on steering knuckle where tie rod attaches will usually release it. b careful not to bend backing plate. ...

Question about GMC Envoy

1 Answer

release rod in the rear hatch assy. Breaks and allows the rod to fall off. You need to remove the handle from the inside of the hatch. You can pick the plugs out of the handle with a small screwdriver

Not finding what you are looking for?
2004 GMC Envoy Logo

3,345 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

2006 GMC Envoy
2006 GMC Envoy

593 Questions

2005 GMC Envoy
2005 GMC Envoy

540 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...