2004 GMC Envoy "o2 sensor endeavor" Questions

...O2 sensors for a 2004 Mitsubishi Endeavor and where is the back sensor located? Hi, Bank 1 Sensor 2 is located on the Right Hand Bank - After the catalytic converter. It is on the bank closest to the ...

...engine. This also is the O2 sensor that is located before the catalytic converter in the manifold. Sensor 2 is located after the catalytic converter, further down below the car. yes I have a V6, ...

...O2 sensor (the one furthest from the engine). It is accessed from below the vehicle. Exhaust manifold closest to the firewall there will be bank one sensor one the one after the converter is bank one ...

...O2 sensor 1 bank one, (sensor before the catalytic converter) and O2 sensor 2 bank one (located after the converter).On the front of the engine, going down you have two as well for there is a ...

O2 oxygen sensors on my Mitsubishi Endeavor 2004. Any unsolve wrong and the ECU is advise to you. Or forgetted RESET the error codes stored in the ECU. Unplugged the negative battery few minutes, this

p0302 and p0153 trouble codes the p0302 is Cylinder 2 Misfire Detected and the P0153 is P0153 O2 Sensor Circuit Slow Response (Bank 2 Sensor 1)____________gm tech2 scanner

...side manifold on a "V" engine or the main exhaust on an inline engine. Senosr 2 is exactly that, the second O2 sensor in the exhaust, usually after the catalytic convertor. Hope this

...Endeavor (83,000 miles) and the engine would not idle smoothly. It will oscillate from about 300 to 500 rpm before stabilizing @ 500 rpm or stalling. Idle "seems" to be a little low. This is a ...

...O2 sensor that covers cylinders one and four, and code 153 covers cylinders two and three. The codes mean the sensors are slow to change. The sensors are supposed to change from lean to rich and back ...

fault code p0135 :o2 sensor geater circuit malfunction (bank 1sensor1) what websit can i go to.. to see that specific part and on the vihcile looks like on my car http://www.obd-codes.com/p0135