2004 GMC Canyon "replace blower motor relay" Questions

blower motor does not work replaced blower motor but still willnot work I dont think that the blower has a fuse just a relay. try replacing it and see if that helps.

blower motor resistor is bad it is under dash on passenger side There is a blower moter resistor on the back of the hvac box. All 4 blower speeds go through this resistor. orange/hi-lit blu/med-tan/lo

...blower motor might b going bad bearings inside  mine did same but when replaced it got all speeds back Here are some more common problems. Motor: The wiper motor is commonly replaced and was ...

replace blower motor wire harness it was fried and the resistor was fried and nothing works now after every thing was installed any solutions to what I do next ??? Please help I'm in Arizona 115 today

...blower motor is taking more load than rated and it blows the fuse. just to check, the fuse is the correct rating for the circuit? 10A i believe. could be the AC switch shorting. may be worth an error ...

...blower control. Got an 04 Canyon that had the same problem. Under the dash on the passenger side there's a speed switch that controls your fan. Cost me $20 at the parts store. Easy to replace. will ...

...blower motor has stopped working. I have replaced the blower motor and the resistor with brand new parts but the fan still does not work. When I turn the fan on the blower motor relay clicks but ...

...may also need to replace the blower motor resistor. If still the problem persists, then you need to replace the blower motor. Please do rate the solution and revert for further assistance. Thanks ...

...blower motor will not blow out heat or nothing, if i replaced the relay in the fuse box in side suv could that work. relay for blower motor, also not sure which one is the relay in the fuse box. This ...

...REPLACE BLOWER MOTOR RELAY.HOOK TEST LIGHT SEE POWER GOING TO BLOWER MOTOR IF YES BLOWER MOTOR FAULTY.IF NO POWER GOING TO BLOWER MOTOR, FAULTY RELAY, FAULTY CONTROL SWITCH OR POOR GROUND AT WIRE TO ...