...02 1.6L engine Firing order: 1-3-4-2 Distributorless ignition system (coils over No. 2 and 4 cylinders) Fig. 3: 2.0L engine Firing order: 1-3-4-2 Distributorless ignition system (one coil over each ...
...02 . Use a 13 mm wrench to rotate the drive belt tensioner (6B209) in a clockwise motion. Remove the drive belt (8620). Installation Position the drive belt on all the pulleys and the drive belt ...
02 montana and it looks like i have to remove the front cover and all pullys to do so is this true? if you have an auto zone they will print you out a diagram for free or try your local library and if
...4.still no pulse at injectors.unplugged ect sensor and cranked engine over still no pulse.I do have specified fuel pressure..Any help would greatly be appeciated... This sounds like a main relay ...
Question about Ford Escape
4.... lol Anyway, I came home, replaced the plug and wire (Ohm d good) and started it. STILL missed and then died. Wouldn't do a #$@!% thing. It blew #12 fuse in the outside fuse panel. I disconnected
...02 Lincoln LS has about 65,000 miles. Last year it started overheating. The engine would start to whine, the temp gauge would get to H and the message light would beep to ''check engine temp''. Took ...
...4 winns the car is started it's just when the car is started the alternator belt stay stationary which tells me that it is not connect to the crankshaft if anyone can help that would be great or ...
1,840 questions posted
Usually answered in minutes!
1,083 Questions
1,107 Questions
900 Questions
559 Questions
486 Questions