2001 Ford Mustang "front" Questions

where is the timing chain located on a car? in the front or the back.. ? i say its in the front but my friend says it's in the back in front of the transmission.. which i think is wrong.i was always ...

... Black Radio Illumination Dimmer Wire: Light Blue/Red Radio Antenna Trigger Wire: Orange/Light Blue Front Speakers Size: N/A Front Speakers Location: N/A Left Front Speaker Wire (+): Orange/Light ...

Repalce cv joints clicking sound coming from the front wheel area, sounds as if it is grinding you need to jack the front end up and see if the wheels will move like the front wheel bearings are gone ...

...3.6L V6 Firing Order: 1-2-3-4-5-6 Cylinders: (back of engine) 3---------6 2---------5 1---------4 (front of engine) Ignition Connections: .(back) 1...2...3 5...6...4 (double checked-this is correct

...Wire: n/a Radio Antenna Trigger Wire: Blue Radio Amp Trigger Wire: Blue (Same as Antenna Trigger) Front Speakers Size and Location: 5′ x 7′ Doors Left Front Speaker Wire (+): ...

The window on the 95 mustang driver side is dropping down in the front slid. poped the door panel and one of the brads was broken that hold the glass in place. so I replace with a bolt. but door back ...

...order Firing Order is 1-3-7-2-6-5-4-8 cylinder number 1 is on the passenger side of engine at the front - 1234 (front to back) on the passenger side 5678 (front to back) on the drivers side here is ...

Why is my right front tire/wheel clicking after vehicle was on lift at mechanics? Had the beast in last week for thermostat. After he took it off the lift, (and test drove it) I left. When I got about

I have a 1998 Mustang Convertible that needs a new front brake proportioning valve. I can not find one for the front but when called Ford Dealer they said it would be $800.00 I do not believe that. ...

...my car darts left to right then at 20 mph you can not hold the car straight. the carlifts in the front, then it will not settle down then when you go down the road you can watch the right front ...