2000 Ford Expedition "arm rear remove wiper" Questions

...simple, you have to open the rear door, remove the door panel and access the motor from the inside of the door. The rear wiper arm is usually held in place by a C-clip so be careful taking it

...rear wiper motor bad so I ordered new one. Now I need to know how to replace it. Step 1: Remove wiper arm. Pull back the little plastic cover to gain access to the retaining nut. Loosen the nut ...

REAR WIPER DOES NOT MOVE WHEN TURNED ON YOU CAN HEAR WIPER MOTOR BUT WIPER DOES NOT MOVE It sounds like the blade has come loose on the shaft. The motor is turning the shaft, so you have a fairly easy

...from the same lever next to the steeering wheel as the rear one. I would try replacing the wiper arm itself and also make sure that there is no binds in the motor or rubbing anything inside the ...

...rear pivot arm. Remove the rear wiper motor shaft nut cover Remove the rear wiper motor shaft nut. Open the lift gate window. Remove the rear wiper motor cover trim panel. Disconnect the electrical ...

...rear pivot arm. Lift the pivot arm to the upright position. Slide the locking tab out. Pull up and remove the pivot arm. Remove the rear wiper motor shaft nut cover. Remove the rear wiper motor shaft ...

...arm. Rear To Remove: Lift and hold the wiper arm away from the rear window. Lift the lock securing the wiper arm to the pivot. Slowly release the wiper arm so it rests against the lock. Remove the ...

rear wiper arm from the rear wiper motor output shaft. (Refer to 8 - ELECTRICAL / REAR WIPERS / WASHERS/REAR WIPER ARM - REMOVAL). - Using a small thin-bladed tool, gently pry at the notch in the base

...rear arm seems to be a J hook but I can't get the wiper assembly off. Is there an unlock mechanism of some kind? Lift wiper arm from rear window. then release latch that holds the blade to the wiper ...

TALKING ABOUT REAR WIPER MOTOR REMOVAL YOU HAVE TO REMOVE PULL THE REAR WIPER ARM COVER BACK TO ACCESS THE WIPER ARM RETAINING NUT.DETACH THE NUT AND PULL WIPER ARM STRAIGHT OFF THE SHAFT TO REMOVE IT