Which cylinder is the number 8 cylinder Looking at your engine from the front of the vehicle the #8 cylinder is the last cylinder on the right, or drivers side. Front of Vehicle (Cyllinder Locations) ...
i have a 1996 crown vic i need to know these touble codes po305 po304 P0304 means that cylinder 4 has a misfire and P0305 is a cylinder 5 misfire. What this means is you may have bad spark plugs, or ...
...test the transponder for an ignition switch 1999 ford crown vic and the key will not turn in the cylinder. I need to know how to test the transponder before I have to drill out the cylinder. I ...
Question about Ford Crown Victoria
96 ford crown vic key lock cylinder broke could not get the car to shut off finaly got it shut off by pulling 0ff the alternaterwire chaange the key lock cylinder car would not start but the lights s ...
im having a misfire in cylinder#2 & #4. My car is struggling to get speed btw 30-40 mph. I did a tune-up on it a month ago an saw oil where the spark plug was. Whats causing these problems some1 ...
Check engine light flashing I was getting cylinder misfire for cylinder #7. What it was doing was shaking and the check engine light would blink on & off. So I replaced the #7 cylinder & the ...
changed all coils and put the right gapped spark plugs in i had it checked on a scanner and it said cylinder 5 was misfiring so they took the plug from 5 and switched it with 6 and told me to drive it
need to know what cylinder is number 5 The drivers side front cylinder is cylinder number 5 on a ford v8.
how to fix cylinder misfire misfire i would check compression make sure you dont have a bad cylinder then wire by wire find the bad cylinder then either bad plug or wire
why wont ignition cylinder turn cover for ignition cylinder will slides back and forth. the ignition cylinder will not move. pull the steering wheel hard to one side while turning the key , if it does
721 questions posted
Usually answered in minutes!
486 Questions
323 Questions
297 Questions
294 Questions
301 Questions