1994 Ford Crown Victoria "low oil pressure" Questions

low oil pressure do not drive it u will destroy the motor quickly Sooner u find out this problem the better But as a said more than likely just bad gauge but dont count on it check it out Mine did the

...low when i checked the oil it had plenty but it sounds like my motor is tapping please help!!!!!!!!!!! You may need to change the oil filter; if it has become clogged, there will be such a pressure ...

...oil pressure gauge remains low car starting to tap car wont run long after running 3-4 minutes starts making a sound as if the engine is drying but oil level full You could have damaged the oil pump ...

make sure it is applying and releasing .if not you got a bad torque converter solenoid.or a stop up screen.restriction in oil passages .or the o-ring seal cut or damage.also check for low oil pressure

...low on oil and noticed the oil pressure gauge bobbing up and down. I changed my oil and added Lucas Oil treatment to it. After 3 weeks, while at a stop light, I heard a crackling sound near under my ...

...SFI, OHC V*. cant fake oil pressure, if its ok now don't worry about it. check connector and make sure its on correct and clean. If you start getting low pressure consistanly then get it looked

...ford crown victoria. thank you KNOCKING NOISE IS NOT A GOOD SIGN.SOUND IF YOUR ENGINE OIL LEVEL IS CORRECT NOT LOW. SOUND LIKE OIL PUMP AND MAIN BEARING FAILURE.YOU NEED A REBUILT ENGINE OR OVER

...i stop 1. You are low on oil. 2. The engine/oil pump is worn and no longer provides sufficient oil pressure at low idle. 3. The oil is very dirty and needs to be changed. check and change the ...

...low oil pressure most oil pressure sensors turn on lght below about 5-7 psi. its odd to me that light took so long to go out and are you running proper wt oil 10-30 say for your climate? most of the ...

...oil pressure specs for the 2006 crown victoria lx 4.6L at idle and at normal operating temp? Mine is reading between 15 and 25 psi. Has 149,0000 on it. 15 seems low. Ford gives a spec of 40-70 psi ...