...Replace the blower motor resister,it is mounted right next to the blower motor,it has a lug with about 7 wires on it.Just unplug it and remove two screws to remove the resister.This controls the ...
replace connector $50.00 could still be resistor issue??? Replaced connector and everything is perfect. Several canyons have had this same issue . looked through several forums. Thanks Guys I have the
...resistor is the problem. Also you didn't mention if you had auto heat, auto heat with navigation, or manual heat. It can make a difference in how to approach your problem. The info I provided above ...
...resistors have an open circuit. Find blower resistors inside the dashboard and replace resistors. Consult a Hayne's manual. I think he is referring to the heat temp not the blower cycle. Warn ...
...heat It would help to know the make and model. Different manufacturers put them in different places and mount them different. i think problem is not in fan , it may b in resistor. Most car ...
...to flow through thus only having hi heat. I would start by checking the blower motor resistor. When you pull it out most of the time you can even see the resistors burnt out. bad stator switch. ...
...resistor,it's mounted next to the blower motor,easy to replace,remove electrical connector,then 2 screws. ...
heat completely, does this sound like I need to replace the resistor card? sounds like the blower resistor,check to see if you have power to the blower if so then it's the blower motor,if not could be
...Heat stays on even with the blower (not on) swich is not running The relay in your blower motor is stuck on, there is a TSB for this issue. Replace the blower motor resistor and you'll be back in ...
...resistor or wiring you will only have one speed,this way you atleast have heat.so if your tech replaced the blower motor when it worked and did not need replacement then it sounds like he is just ...
448 questions posted
Usually answered in minutes!
178 Questions
146 Questions
43 Questions
13 Questions
14 Questions