2005 GMC Canyon "fan resistors" Questions

blower fan will not work on # 2 position At first, the blower stopped working on # 3 and worked on 1,2 & 4. Then I went and changed the resistor and now the blower does not work on # 2 but works ...

fan only blows on high speed. All the lower settings dont work now The blower resistor pack needs to be replaced, it's common for the blower speed resistors to burn up and will need to be replaced. It

...fan control. The rheostat kind which is more common on older cars. It is made up of series of resistors to bring down current for diffrent speeds, and uses nichrome wire. The other kind uses an ...

the temp control fan only works on the highest speed Blower motor resistor. also the wires going into resistor backs out of plug..mine did...

ac switch ac fan switch only works on number 4 setting. 1-3 do not work at all find the resisters for the fan and change that part. it's generally located on the venting for the air under your dash...

heater fan only works on the high position? 2004 gmc canyon heater fan only works on the high position? There is a plug up under the glove box that loosens and you need to snug it up. The resistor ...

Why does my GMC Canyon 2008 Blower fan only works on 2? Blower fan only works on 2? I had a problem on my 2006 sierra, the fan wouldn't work on 5. gm had a curtisy recall, they had to replace a ...

...on only on high 2006 gmc 3.5 so does the heater use to come on sometimes on 3 or 2 as you turn on fan switch If you are referring to the blower speed then you have a blower motor resistor out. I ...

Fan blower motor 2004 GMC Canyon 2.8L 4 cyl w/5speed. the 3 lowest settings on AC/Heater blower motor does not work. It only works on the highest setting. The Canyon has an inherint problem with the ...

...a bad fan motor. Do you have a test light to check for voltage at the motor itself? Lastly, there is a resistor set that changes from low to high that may have one or more resistors burned out. ...