2005 GMC Canyon "blower fuses relays 2004" Questions

blower motor does not work replaced blower motor but still willnot work I dont think that the blower has a fuse just a relay. try replacing it and see if that helps.

...WITH NO CHANGE UNPLUGGED COMPRESSOR STILL BLOWS UNDO RELAY AND IT WONT BLOW. It seems that your blower motor is taking more load than rated and it blows the fuse. just to check, the fuse is the ...

04 gmc canyon replace blower motor wire harness it was fried and the resistor was fried and nothing works now after every thing was installed any solutions to what I do next ??? Please help I'm in ...

...blower motor fuses are OK (inside and underhood fuse boxes). No power to fan control switch. Switch and Blower Motor are OK I have the same Question .....WHERE is the front blower relay located? Not ...

...fuses. If some other defective stuff that you replaced broke the fuse then you may need to repower the system by replacing the fuse or a relay. As for the air, do you mean no blower for both heat ...

...relays ? I know it has a blower motor control processor, just wondering if there are relays involved that I could check. Yes, generally the blower motor relay is located in backside of this devices, ...

...pins missing. They deleted the relay for O2's just ran them on a fuse. And if you don't have a rear blower, you wouldn't need that relay. They also started putting the blower relays in the

blower not working Check fuse #14 (10A) in the under dash fuse box (drivers' side). Check the blower motor relay in the underhood fuse box. to check it, simply switch it with another identical relay. ...

front blower motor will not blow out heat or nothing, if i replaced the relay in the fuse box in side suv could that work. relay for blower motor, also not sure which one is the relay in the fuse box.

...fuses and relays that only leaves the blower motor resistor pack. Here is a diagram of how to replace it. I hope this corrects your concern... Blower Resistor (Manual A/C Model) REMOVAL Remove the ...