...clutch cable/rod from the clutch arm and see if you can move it or if when you remove it does it goes back further with the spring i.e. not seated with the linkage in place...? (you should feel the ...
...cable clutch then its a new cable or a clutch ,similar with a hydraulic system then either a hydraulic fault or the clutch has failed where the thrust bearing has gone through the clutch ...
...clutch cable removal and install of clutch cable wrong, this year does have a cable , sorry for misinformation., very easy to replace, undo the two nuts at the transmission and then the end of the ...
clutch cable, therefore no clutch fluid. Follow along the drivers-side under the hood, a lever connected to a cable should be a-top the transmission. This should be periodically sprayed with chain and
...clutch cable put in my 1996 nissan sentra 1 week ago by Meineke; however, I having this awful grinding when I put the clutch in reverse, also I am have a awful time when changing my other gears. I ...
...clutch cable and now there is way too much freeplay (about 4 inches or so) and it is occasionally hard to engage the gears, especially first gear. It even occasionally struggles to engage the other ...
How do you replace a 1998 Nissan sentra clutch cable disconnect it from the clutch pedal and the other end at the throw out fork, remove cable and reinstall new one
...gears. Clutch probably needs replaced but have a mechanic check it out first because it's a fairly expensive job. If your clutch is actuated via a cable (not hydraulic), it may just need
...clutch cable broke (actually bracket broke) and I tried to force it into gear to get it home... After I replaced the cable it will not go into first or second gear. It can go into 3rd, 4th, 5th, and ...
clutch cable broke because the the piece its conected to on the outside isnt moving. what would cause this the clutch is no good it needs a new clutch
373 questions posted
Usually answered in minutes!
798 Questions
708 Questions
716 Questions
570 Questions
508 Questions
