2003 Mazda Protege "powersteering pulley" Questions

...starts squeeling That means the fanbelt on the alternator is not tight enough or needs to be changed, if the belt on powersteering goes via A/C than it might be too tight on the powersteering

...powersteering can be loosened as well, 7. once u remove the crank pulley..u can take the 10 mm blots out of the timing belt/water pump covers.u will also need to support the engine(under the oli pan ...

...pulley on it usually on left front side of engine it will have two hoses going to steering box powersteering pump has a reservoir with a cap say powersteering fluid or see steering wheel symbol with ...

have no powersteering but battery light is on car stiull runs! battery light came on lost powersteering car never died still starts and runs but no powersteering? Have you looked at the belt(s) to see

...powersteering pulley,then go down around the bottom right ac pulley,then to your left bottom crankshaft pulley,the back side of the belt thats on your top alternator pulley wraps around the soft edge ...

powersteering after 30 seconds of running have you bled the air out. During the installation procedure, after mounting the pump on it's mounting bracket, the hoses has to be connected accordingly onto

...powersteering pump keeps breakin and the belt falls off. What other pully would cause that problem? two things you can do.one buy a plate for pulley from dealer put it on. second remove the bracket ...

remove the pulley.remove the powersteering lines, theres a preasure line and a return hoseremove the three bolts holding the pump to the bracket,reverse directions to install new pump. hope this helps

...getting ate up plus powersteering pump pulley is loose Replace power steering pump & check for a worn crank damper pulley With a loose power steering pulley, why would you even ask that

...on how to remove pulley, or how much trouble to remove bracket that holds pulley. Tks! i believe that loosening the powersteering pump and just moving aside would allow you to get at the ...